Slate floor tiles – As the gray brick fireplace into something fresh and exciting is something that many owners try at some point or another. Perhaps the house he bought was not enough chimneys looking for, or maybe you’re tired of the brick facade after all these years. Either way, installing slate tiles on the brick surface is a great way to fix things in the house, giving it a rustic touch that will last many years. Using the serrated edge of the trowel spread an even layer of glue on the surface of the fireplace, which is now coated with a dry layer of thinnest adhesive yesterday. Check the back of each slate tile individually. If the back is fairly flat, just install the piece of slate directly on the thinnest. If there are some places where the stone is thinner, simply apply a little glue with its palette before putting it on the mounting surface.
Apply gentle but firm pressure, move the slate tile slightly in all directions to ensure adequate adhesion between the tile and the adhesive mortar. Do not use strong pressure board, because you can cause the stone to crack if it is a softer piece of slate. Use spacer’s space between tiles slate floor tiles. Use your level to ensure that the installation is level and plumb, adding tile wedges if necessary to compensate for inconsistencies in the size of the slate tiles. Repeat steps 3 and 4. Use your tile wet saw to make the necessary cuts corners or edges.
10 Photos Gallery of: How Coat a Brick Fireplace with Slate Floor Tiles
Tips & warnings for slate floor tiles. While tile spacers are spacer rubber or plastic cross-shaped space between tiles added, depending on the size of the spacer wedges they are rubber or plastic mini-wedge-shaped spacers that can be used in conjunction with spacers to help change traditional grout- joint width using the thin or thick side of the wedge, depending on the size of the tile in question. A typical 12×12 tile requires a level of 3/8 “notched. Bigger Tiles require a larger notch and smaller tiles vice versa.